b100supply.com

Home > Reactor Equipment >   Mazzei Venturi Injector
	This is the venturi you need to set up your appleseed for the GL 1 day process Related Article GL 1 Day Process Our Price: $54.00 Product Code: 125 Qty:

Description   This venturi is sized specifically for the HF, NT and B100 Supply pumps. It can be used for methoxide injection or used to inject air as part of a GL 1 day system.  It is made from PVDF (KYNAR) and will handle pressures up to 200 psi and temperatures up to 200F. Suction line is requires 1/4" ID tubing. Input and output ports are threaded for 3/4" NPT. It has a built in check valve to prevent oil from flowing out the suction port when not flowing. When used to drive the air circulation in the GL 1 Day process it can flow better than 10 SCFH or 4 liters/min. If used to draw methoxide with the oil at 120F this venturi will lift water 3 feet at the rate of 24 gallons per hour with an oil flow rate of 6 gpm. That gives a methoxide to oil ratio of 6.7% and the oil will take between 3 and 4 trips through the pump before all the methoxide is introduced.

Related Products... 30 psi Relief Valve Our Price: $9.90 Add Carboy Our Price: $24.95 Add Northern Industrial Cast Iron Clear Water Pump — 720 GPH, 1/2 HP, 1in. Our Price: $39.99 Add 5 Gallon Hedpak® Our Price: $13.75 Add Switch with Pilot Light Our Price: $9.85 Add

 Share your knowledge of this product with other customers... Be the first to write a review.

Browse for more products in the same category as this item: Reactor Equipment